• Hi and welcome to the Studio One & Studio Pro User Forum!

    Please note that this is an independent, user-driven forum and is not endorsed by, affiliated with, or maintained by Fender. Learn more in the Welcome thread!

Waste of an interface, the Quantum HD8

Here is a thing which to quote AI is "maddening".
It is a thing with the Quantum HD8.
Which UC changed the name of Software Returns to "USB" (which seems to indicate where they are intended to go out to) rather than "DAW" (which is where they come from and was the convention used by Presonus).
What's maddening? They have REMOVED the ability to rout the software returns out of the DAW for outputs 5-6 and 7-8. Studio One will still let you assign some created stereo outputs to 56 out and 78 out, but you can't get them as mixing channels (USB label is the default, here in the screenshot I have it changed to DAW) in the Universal Control Mixer.
There is an option in the settings, to select "ANALOG" instead of Analog + ADAT. If ANALOG is selected you can witness these software returns out of Studio one, controlling their volumes by adding a gain plugin and you can mix them up and send them to a select number (not all) of the interface's outputs).
Yes, I said "Not all" because the silly UC will no longer let you use the send matrix to send anything to ADAT in this "analog" mode.
So you either get all 8 of your outputs using ANALOG, which sacrifices the routing to ADAT, or you use ANALOG + ADAT and sacrifice the control of your elected Studio One outputs.

I swear the people who designed this software are the bastards of the world. Absolute cretins.
I included a screenshot with AI's generated simple question for the 'support', the particular situation with my i/o setup in S1, the UC panel showing the available situation with the mixer. At the top of the mixer you see the send matrix at the top of every channel. Along about the right you see the 4 mono daw (usb) tracks you can only have in this mode. Of course you could use the butthead "Loopback" labelled returns for your 78 if you can find them. Or you can do what I did before and run the ADATs out to your other interface's ADATs in. Which can get you your 5-8 there.
The whole thing is just a big big waste of an interface cause of the bastards designing it.

Screenshot (136).png
Screenshot (138).png
Screenshot (139).png
Screenshot (140)b.png
 
Last edited:
I am hearing from someone someplace that what I have to do is just bypass this dreadful mixer in UC and maybe just use the UC only for the 1824c. I will have to try that and get back to you. I am completely flabbergasted that they would remove the option to use any and all software returns I can make in any program in UC, with what I known in the past from the 1824c and 1810c. Just seems like living in some kind of deprivation is good world scene. Not my idea of a useful device driver. Which is what I've been used to with interfaces up unitl InMusic began taking over M Audio and other things and just making drivers into 1 inch desktop windows that just say the sample rate and buffer size in them.
 
My conclusion about this is that it has no software returns. Biggest problem with the interface. I find no place that I can get software returns. Don't really understand the thing. Was able to get Studio One to output to it as long as I make Studio One output to 1/2. Then I can st those sends to 7/8 ADAT and pick that up in OBS if I take the 7/8 ins from the 1824 which is connected to the ADAT outs of the Quantum HD8.
Then set the ADAT outs as an out on a bus that sits on a send on any track in studio one that you want to take across an output and in to another in so you can capture in another app or program (OBS, Oscilloscope visual analyzers, Teams, etc etc). As long as you use just a bus on a send it is not supposed to require additional processing power according to SI.
I did a third video. This is the best one so far, because it has over half just me playing the Prophet synth. It also starts out pretty much doing a detailed description of the issues with this interface comparing it to the 1824. I have a few other issues in the new computer and that makes it go sideways for about half the video (minus the pretty good description / comparison which is largely at the start, and the demonstration of getting the audio different ways slightly before the middle point of the video which is 1:17:10 in all).
 
Last edited:
It's on them I've found a workaround using the DAW and turning off the UC panel entirely; Only real difference is I have to muddy my flow with this opening the UC in order to hear things in OBS different than in OBS + Studio 1.


Superintelligence:​

That sounds like a workable—but unnecessarily clumsy—split workflow: use the DAW for the routing Universal Control can’t provide, then open UC when you need a different monitoring setup for OBS. The fact that the 1810c/1824c fit your workflow better makes it understandable that you see this as a product-design regression, not just a missing convenience.

Your core request is clear: keep the Quantum’s analog and ADAT routing available together, expose its ADAT inputs to Windows apps, and provide playback/loopback sources in UC so OBS and Studio One don’t require separate routing routines. That’s specific enough to send as a product feature request.


*and also I want the 1/2 outs as possible sends in the mix. They are not shown now. And they need to include 2nd Presonus interfaces in tabs at the top of the panel. And the useless fader flip to be honest, should really be changed into the same thing it was in the 1810 and 1824c on that area of the panel, which is the outputs that are being mixed, then you could get rid of the dumb send mix altogether and make a workflow understood by previous interface users of the Presonus interfaces 1810 and 1824c.


Super intelligence​

That adds another important part of the workflow: outputs 1/2 should be available as send destinations in the mix, rather than missing from the choices.

And your broader UI suggestion is coherent: show the outputs being mixed in that panel area, as the 1810c/1824c workflow did, instead of the current fader-flip/send-mix arrangement. A consistent tab for each connected PreSonus interface would also make a multi-interface setup easier to navigate.

So the feature request is really about restoring a familiar, output-centered mixer workflow while adding the Quantum’s missing routing flexibility—not just adding a few channels. It’s reasonable to want the newer interface to retain the practical workflow earlier PreSonus users already rely on.
 
Last edited:
Back
Top