• Hi and welcome to the Studio One & Studio Pro User Forum!

    Please note that this is an independent, user-driven forum and is not endorsed by, affiliated with, or maintained by Fender. Learn more in the Welcome thread!

Can mouse scrolling input be disabled for parameters?

Henrik

Member
I am using a normal wired mouse with a scroll wheel with Studio One and I would like to NOT have parameters react to mouse wheel scrolling, when the mouse pointer is hovering over a parameter. Parameters are panning, volume, etc. Is that possible to configure in Studio One?

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
I don't think so. Short of disabling the wheel completely (mechanically or maybe a system preference/driver setting) the only way is to be more precise/careful when and where to use the wheel. Or maybe there are mice available with more detailed config options, like requiring e.g. shift or alt to activate the wheel?
 
I really wish I could scroll horizontally in the mixer with the mouse scroll wheel, without fearing hovering over a parameter and changing it unknowingly. I never use the scroll wheel for changing parameter values. Good tip on looking into the mouse setup, but that would be system wide, unless I look into profiles on the mouse.
 
Maybe adopt the habit of placing the mouse over the name labels below the faders before shift-scrolling? Think of it as the scroll row ;)
 
It's too stressful doing that ... carefully placing the pointer on a label and then NOT move the mouse when scrolling the wheel. Plenty of energy goes into mixing and I'd rather not have to worry about it. And too risky if something gets nudged while scrolling. I guess I'm intolerant, as I don't ever see people complain about it. And I have more gripes with Studio One... but one gripe per thread is enough ;)
But I love Studio One regardless.
 
Last edited:
I really wish I could scroll horizontally in the mixer with the mouse scroll wheel, without fearing hovering over a parameter and changing it unknowingly. I never use the scroll wheel for changing parameter values. Good tip on looking into the mouse setup, but that would be system wide, unless I look into profiles on the mouse.
I don't know if this works for Mac users but in Windows you can scroll horizontally in the mixer by press and holding the [Shift] key and moving the wheel mouse without it affecting any (pan, fader, etc.) parameters.
 
Guys, I forgot about that! It works on macOS as well.

But, I stopped using it, because not every parameter ignores Shift+scroll. Panning is still affected.

I am holding down Shift here (Pan mode = Dual):
To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
 
Last edited:
I'm using a different Bluetooth mouse now but my previous one had a scroll wheel that moved right and left which allowed Horizontal scrolling. I've contemplated switching back to it but grabbing the bottom horizontal bar is nearly as quick and I don't use Horizontal scrolling that much.
 
To avoid unwanted scroll wheel actions, you can set up some keyboard shortcuts for moving left/right in your DAW and, using the free XMouseButtonControl tool, map these keys to scroll wheel up and down actions.

If you want, the XMouseButtonControl tool also lets you create keyboard shortcuts for combined mouse actions, such as right-click + wheel up/down, which I use for vertical movements.
 
I can’t keep losing hours fixing mixes because a simple scroll changes parameters (faders, knobs, etc.) without feedback.

This behavior makes the software unusable in a professional environment. It’s unbelievable that there’s still no option to disable this « scroll-to-change » behavior.

Calling it a « feature » is misleading, it’s a source of silent hidden errors.

I’m done with this, and I’m going back to Cubase for this reason.
 
I can’t keep losing hours fixing mixes because a simple scroll changes parameters (faders, knobs, etc.) without feedback.

This behavior makes the software unusable in a professional environment. It’s unbelievable that there’s still no option to disable this « scroll-to-change » behavior.

Calling it a « feature » is misleading, it’s a source of silent hidden errors.

I’m done with this, and I’m going back to Cubase for this reason.
I completely agree with you but only very recently (I think only in version 15, maybe 14 but not earlier for sure) were you able to have this option in Cubase. It was much worse than Studio One because there was no option to use shift to activate scroll instead of changing parameters. If you happened to use the mouse wheel in the wrong place by accident, which was very easy to do in the Mix Console, you could easily change things by mistake.

I've gotten used to the Shift Scroll thing in S1 and rarely screw up nowadays, it has became muscle memory, but I agree that there should be an option to disable it completely. It's an old request even from the Presonus forums time.
 
Last edited:
I am using a normal wired mouse with a scroll wheel with Studio One and I would like to NOT have parameters react to mouse wheel scrolling, when the mouse pointer is hovering over a parameter. Parameters are panning, volume, etc. Is that possible to configure in Studio One?

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.
I hope studio pro team disable mouse wheel parameters
 
  • Like
Reactions: OFS
This [post title] used to be a somewhat common complaint in the old forum. Particularly for newbies. My consistent response is, its actually more important to know where one's mouse cursor resides before scrolling. This is in so many apps, programs, spreadsheets, and the like. One wouldn'tt be haphazardly scrolling in Excel if they didn’t first know where they've positioned the mouse. Imagine, doing your budget! Yikes! The same holds true here. For scrolling up or down, take a few breaths and learn where scrolling is best positioned. Its not over data fields, nor over console faders, pans, and such. Once you have a fairly easy command of how Studio One/Pro's GUI is structured, its actually a breeze, and even faster to use, such as you wont need to first click on a field, to adjust (scroll or enter values). Cool beans!
 
This [post title] used to be a somewhat common complaint in the old forum. Particularly for newbies. My consistent response is, its actually more important to know where one's mouse cursor resides before scrolling. This is in so many apps, programs, spreadsheets, and the like. One wouldn'tt be haphazardly scrolling in Excel if they didn’t first know where they've positioned the mouse. Imagine, doing your budget! Yikes! The same holds true here. For scrolling up or down, take a few breaths and learn where scrolling is best positioned. Its not over data fields, nor over console faders, pans, and such. Once you have a fairly easy command of how Studio One/Pro's GUI is structured, its actually a breeze, and even faster to use, such as you wont need to first click on a field, to adjust (scroll or enter values). Cool beans!
I'm sorry but I think you are missing the point completely. There's no way to screw up an Excel spreadsheet by just scrolling around the page because in Excel the scroll wheel does the ONLY thing it was born to do - scrolling.

In SPro you can accidentally mess up the mixer just by scrolling in the "wrong" place. The thing is, there shouldn't be a "wrong" place to scroll because the only action scrolling is supposed to do is move around the screen no matter what app you are using. I would really like to know the opinion of an UX/UI specialist on this topic, but I feel that anything that allows the act of scrolling around on an app - a crucial and constantly used function, I might add - to might mess up your finished product is a bad UI/UX decision.

So it's not a question of being a newbie, it's just that this app forces you to be careful with a feature that in 99% of all other software works in a secure way.

Another evidence to this is that other DAW's either provide the option to disable this behaviour (REAPER, Cubase) or don't allow the mouse wheel to change stuff around (Pro Tools).
 
I find the same issue when using Mastering mode. If the mouse is over one of the pause times when the wheel is moved, then it will be altered. Have you ever looked at the undo stack after spinning the wheel? It shows a long series, like this:
1795379521747.png

Would it not make more sense to require at least a click on the item before you change it? As much as I like FSP, it's baffling to me why the designers don't take advantage of well established standards and practices in user interface design, my former speciallty, BTW.
 
Back
Top