Studio Pro and Atom Controller Problem

[Sebastian Holtzer]

The OP started talking about ATOM and then we have moved onto ATOM SQ. They are two very different things. Yes ATOM SQ firmware is at 1.17 currently. My SQ lights up with the keys white and the octave keys should be blue.

Sorry, my mistake i`m quit now.

 

[BobF]

All are Pads are white and don`t react if you press on them. Midi Focus shows Atom SQ as connected device and even turning the knobs are showing as detected/changing values.

I would open a ticket with support. This *appears* to be something specific to your system.

 

[InLight-Tone]

Heads up, and thanks for all the help. Turns out the problem was that SP was defaulting to my main keyboard and not the Atom. Once I selected the Atom as input, it works. Sorry for the lame confusion...

 

[Sebastian Holtzer]

I would open a ticket with support. This *appears* to be something specific to your system.

No need for. You guys were right. I hav`nt seen in the inspector that the input on all instruments was gone. I had`nt checked it because all was working fine before and I think i checked it in 7 but not in 8. I am so sorry. I can remember now there was an error message with missing instruments. my bad. Thanks a lot.

 

[Jemusic]

Glad its working OK. Midi can cause some grief at times. The input setting for ALL INPUTS has caused issues for me in the past. I find it's best to select the exact midi input source in that menu. It is easy to forget what it is set on, especially when you need to change it to something like atom.