• Hi and welcome to the Studio One & Studio Pro User Forum!

    Please note that this is an independent, user-driven forum and is not endorsed by, affiliated with, or maintained by Fender. Learn more in the Welcome thread!

MPE through plugin not possible - Nudist Audio Guitarcatcher

Azu

New member
Hi,

So nudist Audio released Guitarcatcher which sends MPE and MIdi through the plugin,
Seems like Studio Pro does not recognize MPE from Audio plugins.
Tried in Logic and it works,
Any help or confirmation of impossibility helps
Thanks!
Azu
 
How did you test it?

The receiving instrument must accept MPE. If it does, you have to enable MPE for that instrument in the instrument editor. For recording MPE you have to switch to MIDI 2.0 in the note editor and of course record enable the track with the receiving instrument.
 
How did you test it?

The receiving instrument must accept MPE. If it does, you have to enable MPE for that instrument in the instrument editor. For recording MPE you have to switch to MIDI 2.0 in the note editor and of course record enable the track with the receiving instrument.
I tested it sending MPE to Diva or Repro 5 from an audio plugin.
 
Following the points I made?
 
Then it must be something specific with the plugin. Unfortunately, I only have non-mpe audio fx and instruments, but at least I can confirm that setting the instrument's midi device input to the audio fx midi out works just fine. Tested with Cardinal FX, using the audio-to-cv-pitch module in there. See screenshot.
And MPE is no different in setup. You just need to additionally enable it in the headers of any plugins that are not native DAW plugins.
 

Attachments

  • Screenshot 2026-11-07 015113.png
    Screenshot 2026-11-07 015113.png
    222,3 KB · Views: 5
Then it must be something specific with the plugin. Unfortunately, I only have non-mpe audio fx and instruments, but at least I can confirm that setting the instrument's midi device input to the audio fx midi out works just fine. Tested with Cardinal FX, using the audio-to-cv-pitch module in there. See screenshot.
And MPE is no different in setup. You just need to additionally enable it in the headers of any plugins that are not native DAW plugins.
The plugin has both MIDI and MPE out, MIDI works well.
 
Back
Top